Swimming Pool Covers

You can significantly reduce swimming pool heating costs by using a pool cover. On the following pages, see the tables showing the costs of heating pools with and without pool covers in different U.S. cities:

Use of a pool cover also can help reduce the size of a solar pool heating system, which can save money.

How They Work

Swimming pools lose energy in a variety of ways, but evaporation is by far the largest source of energy loss. Evaporating water requires tremendous amounts of energy. It only takes 1 Btu (British thermal unit) to raise 1 pound of water 1 degree, but each pound of 80ºF water that evaporates takes a whopping 1,048 Btu of heat out of the pool.

The evaporation rate from an outdoor pool varies depending on the pool’s temperature, air temperature and humidity, and the wind speed at the pool surface. The higher the pool temperature and wind speed and the lower the humidity, the greater the evaporation rate. In windy areas, you can add a windbreak—trees, shrubs, or a fence—to reduce evaporation. The windbreak needs to be high enough and close enough to the pool that it doesn’t create turbulence over the pool, which will increase evaporation. You also don’t want the windbreak to shade the pool from the sun, which helps heat it.

Indoor pools aren’t subjected to the environment, but they still can lose a lot of energy from evaporation. They even require room ventilation to control indoor humidity caused by the large amount of evaporation. The ventilated air also must be conditioned, which adds to the energy costs.

Pool covers minimize evaporation from both outdoor and indoor pools. Covering a pool when it is not in use is the single most effective means of reducing pool heating costs. Savings of 50%–70% are possible. Pool covers on indoor pools not only can reduce evaporation but also the need to ventilate indoor air and replace it with unconditioned outdoor air. You can also shut off exhaust fans when an indoor pool is covered, which saves even more energy.

Types of Pool Covers

Technically, all you really need for a pool cover is a large sheet of plastic. Plastic meets the requirement of being a vapor barrier. But a large sheet of plastic that you get from the lumber store is probably not your best choice. It will be very difficult to handle and store, it tears easily, and sunlight will deteriorate it rapidly. You can use a sheet of plastic, but it will be very inconvenient and it will probably only last 1 to 2 seasons maximum.

It’s best to use a cover designed specifically for swimming pools. They’re made of special materials, such as UV-stabilized polyethylene, polypropylene, or vinyl. They can be transparent or opaque. Covers can even be light or dark colored.

One of the lowest cost covers made specifically for swimming pools is the bubble (or solar) cover. Bubble covers are similar to bubble packing material except they use a thicker grade of plastic and have UV inhibitors.

Vinyl covers consist of a heavier material and have a longer life expectancy than bubble covers. Insulated vinyl covers are also available with a thin layer of flexible insulation sandwiched between two layers of vinyl.

Outdoor pools gain heat from the sun, absorbing 75%–85% of the solar energy striking the pool surface. This is an important contribution to the pool’s heating needs. A pool cover will decrease the solar gain contribution to some extent, depending on what type you use. A transparent bubble cover may reduce pool solar energy absorption by 5%–15 %. A completely opaque cover will reduce it by 20%–40%. You need to consider this when selecting a pool cover.

You also need to decide whether you want a manual, semi-automatic, or an automatic pool cover. You can manually pull the cover on and off, fold it, and place it somewhere out of the way. You can also purchase a pool cover reel to help manually roll up the pool cover. The reel, usually on wheels, can be rolled out of the way.

Semi-automatic covers use a motor-driven reel system. They use electrical power to roll and unroll the cover, but usually require someone to pull on the cover when unrolling, or guide the cover onto the reel when rolling up the cover. Semi-automatic covers can be built into the pool deck surrounding the pool, or can use reels on carts.

Automatic covers have permanently mounted reels that automatically cover and uncover the pool at the push of a button. They’re the most expensive option, but they’re also the most convenient.

Some pool covers fit into tracks along the sides of the pool. This prevents anything or anybody from getting into the pool. They even support the weight of several people. If liability is a concern, these are a good option to explore. They can be run manually, semi-automatically, or automatically. Safety covers are recommended for public pools, and may be required by inspectors.

How to Use a Pool Cover

Pool covers should be used during your swimming season. If you use your pool during the daytime, take off the cover just before swimming and replace the cover as soon as you’re done using the pool.

If you use your pool only at night, the effectiveness of a pool cover will depend on whether the evaporation and other losses prevented by the cover exceed the solar gain reduction caused by the cover. The type of cover and the climate affects this balance. In dry and/or windy conditions, the evaporation rate of the pool increases. Therefore, it is generally beneficial to have a transparent or bubble cover on during daylight hours. In warm, humid conditions the evaporation rate decreases. In this case, it may be more beneficial to leave the cover off during the daytime.

Other Pool Cover Benefits

Besides offering energy savings, pool covers also do the following:

• Conserve water by reducing the amount of make-up water needed by 30%–50%
  
• Reduce the pool’s chemical consumption by 35%–60%
  
• Reduce cleaning time by keeping dirt and other debris out of the pool.

1.Automatic operation mode
2.Auto-restart, Auto defrost.
3.LCD Control panel with luxury outlook.
4.Cooling&heating.
5.Wide ambient range : -10 centigrade to 43centigrade
6.Japanese brand compressor
7.Green refrigerant R410

Other main characters.

1) Long operating life: Using the advanced stainless steel/titanium
metal water heat exchanger, which resists the erosion from chlorine
in the water, creates a longer lifespan.
2) Economical and high-efficiency: Using heat pump technology, compared
with other ordinary hot water equipment (for example, combustion oil
boilers, combustion gas boilers, electronic boilers and so on), it
reduces operating costs by 65-80%, In addition it creates very little
pollution.
3) Bright design, easy installation and replacement: Unit design
separately for main model and water unit model, with water unit
inside, avoiding freezing in the winter. The unit is remarkably
compact, with pump and flow switch inside.
4) Advanced controlling: It is extremely easy to control. The swimming
pool heat pump unit is in the room, because of the mini-computer
intelligent controlling .
5) Safety: Water and electricity are insulated, no open fire, no creepage.
6) Quiet: Using the high-efficiency, low sound rotary or scroll compressor,
low noise fan, high quality pump, creates an extremely quiet machine.
7) High technology heat exchangers: Due to brand and heat exchanger, it
runs more efficiently.

  

1.Automatic operation mode
2.Auto-restart, Auto defrost.
3.LCD Control panel with luxury outlook.
4.Cooling&heating.
5.Wide ambient range : -10 centigrade to 43centigrade
6.Japanese brand compressor
7.Green refrigerant R410 

Other main characters. 

1) Long operating life: Using the advanced stainless steel/titanium
    metal water heat exchanger, which resists the erosion from chlorine
    in the water, creates a longer lifespan.
2) Economical and high-efficiency: Using heat pump technology, compared
    with other ordinary hot water equipment (for example, combustion oil
    boilers, combustion gas boilers, electronic boilers and so on), it
    reduces operating costs by 65-80%, In addition it creates very little
    pollution.
3) Bright design, easy installation and replacement: Unit design
    separately for main model and water unit model, with water unit
    inside, avoiding freezing in the winter. The unit is remarkably
    compact, with pump and flow switch inside.
4) Advanced controlling: It is extremely easy to control. The swimming
    pool heat pump unit is in the room, because of the mini-computer
    intelligent controlling .
5) Safety: Water and electricity are insulated, no open fire, no creepage.
6) Quiet: Using the high-efficiency, low sound rotary or scroll compressor,
    low noise fan, high quality pump, creates an extremely quiet machine.
7) High technology heat exchangers: Due to brand and heat exchanger, it
    runs more efficiently.
 

If you have a problem or question not answered on this page, please contact us

     The current speed thermoelectric domestic water heaters in annual sales 800,000 -90 million the next five years, demand for water heaters and water heaters thermoelectric current speed of growth trends, speed thermoelectric water heater market will usher in opportunity.
     
     Heat pump water heater a few years ago into our country and the rapid development. Known as the "fifth generation water heaters," is the use of heat pump principle, learned from the external environment pressurized thermal heat to form a hot water system of hot water equipment. Especially in the hotel Hotels, hospitals, schools, halls, beauty salons, swimming pools thermostats, and other recreational bathing commercial utility of large-scale application. Home heat pump water heaters are also widely used in some cities in the new properties matching projects.
     
     Statistics show : a total household energy consumption is 15% comes from water heaters, and may therefore be said heat pump water heater market has good prospects for development. According to the State Council Development of Market Economy Research Center of the "2006 Chinese cities water heater market report" shows : heat pump water heater market grew 25% in the next three years is expected to create annual 50 billion yuan in the market, it is estimated that the growth momentum will continue for five years.